With a maximum adhesive force of 55 kg and the all-round rubber lip (increased friction force), it guarantees a secure hold on your metal body. Suitable for all types of awnings (roof and wall as well as manufacturers such as Thule, Fiamma and Dometic). Suitable for panel vans, vans and buses as well as compact campers.
Thanks to the rubber coating, the paintwork is highly protected against scratches. Unlike with suction cups, there is no need for time-consuming cleaning of the bodywork. However, if the surface is extremely dirty, it is advisable to clean the surface before attaching the magnets; water under the magnets can prevent the adhesive force. The magnets can be attached to a foil-covered bodywork. The magnet and rubber coating are UV-resistant.
Mass:
each magnet 125mm in diameter, approx. 1cm thick, M6 threaded pin protruding 17mm
Special feature:
The magnet works without a vacuum, unlike suction cups, and can therefore also be used at heights of up to 5,000 m above sea level. The magnets and screws are Made in Germany!
Easy assembly / disassembly.
Before attaching the magnet, screw it onto the support base. Then attach one side and slowly pull it onto the metal surface. To remove it, simply lift it by the rubber lip and carefully pull the magnet off. No tools are required. When storing the magnets in the bags, please ensure that the magnetic surface is on the foam side.
Scope of delivery:
- 2 x magnet 125mm with M6 threaded pin including bag with foam insert
- 2 x M6 knurled nut flat
- 2 x M6 edge nut with extension (particularly suitable for Thule awnings, as the support leg is smaller than with Fiamma and Dometic)
- 1 x Bag for screws
What else can the magnets do?
Of course, you can use the magnets for other applications, e.g. attaching a solar bag to the side of your car. Screw in a hook and hang the lamp on the car. Screw in an M6 eyelet and hang a dog leash. There are no limits to your imagination.
Notes:
- Wind/rain/snow/storm: Please note the information provided by your awning manufacturer regarding wind/rain/snow/storm, and follow the values given in the awning manufacturer's documentation. As long as you are allowed to use the awning with the values given, you can also use our awning magnets. Safety measures such as the instructions for guying or additional rods must be observed.
- Use magnets up to wind force 6 (max. 45km/h). (In windy and gusty conditions, don't forget to tie down the guy ropes)
- Avoid fingers or skin getting between the magnet and the metal surface and being crushed by the attractive forces. NOT A CHILDREN'S TOY! If the two magnets come together, there is hardly any way to get them apart again without damaging them.
- Avoid allowing magnets to collide or hit the metal surface too quickly as magnets can splinter and create sharp-edged parts.
- Strong magnetic fields can affect or damage electronic devices. Particular attention should be paid to: pacemakers, implanted defibrillators, hard drives, credit and debit cards, hearing aids and loudspeakers.
- Above 80°C, magnets can permanently lose their adhesive power. Therefore, first check how hot your body is.
- If you have recently sealed or polished your camper, the magnets can leave dull visible marks on the surface.
- The product for sale (awning magnets) is a product of the STYYL brand and is not related to any other brand or to the manufacturers of the awnings for which the accessory is intended. The buyer and seller mutually agree that liability for consequential damages caused by use is explicitly excluded. Please observe the operating instructions, safety instructions and warnings of the awning manufacturer.
With the code " GRANDCALI" you get 10% discount on your order at Styyl
